Motortech VariSCR, Руководство по эксплуатации

Страница: 69 / 112

8 Settings via the MICT
Rev. 06/2020 69
8.11.5 Exhaust Control – SCR – Dosing Valve
Set the parameters of the dosing valve:
PID Controller
If necessary, change the basic setting for the PID control of the dosing valve. This can be
adjusted during operation via the runtime adjustments (see
Runtime Adjustments – Dosing Valve
on page 94). When you make the settings, you can be supported by the trend views in the
runtime data (see
Runtime Data – Trends on page 85).
– NO
X
Enter the target value for the NO
X
sensor at the outlet of the catalytic converter.
– Sampling Time
If required, change the sampling time of the PID control.
– Start Delay
If necessary, change the start delay of the PID control.