Motorola XR400, Руководство по интеграции

Страница: 48 / 126

3 - 20 XR Series RFID Readers Integrator Guide
Filtering
The XR Series RFID readers allows setting filters based on rules and then associates the filters with a specific read
point. This prevents the readers from reporting specific tags. Filtering out tags involves the following steps:
•
Creating a filter rule
•
Creating a filter and associating it with the rule
•
Associating a filter to a read point class
•
Associating a read point class to an antenna.
The following section describes these processes.
Creating a Filter Rule
To create a filter rule:
1.
Set the Global Filter to select the type of tags type to be filtered.
2.
Click Tag Selection , the Tag Selection Filter window appears.
Figure 3-21
Tag Selection Filter Window
3.
Click Create A New Rule , the Tag Filter Rule window appears.
NOTE The Tag Selection Filter is associated with one or more rules. Rules can be created using the Create new
rule button. The filter applies to tag selection only after the same has enabled in the read point class
under
Tag Selection .