Motorola XR400, Руководство по интеграции

Страница: 43 / 126

Administrator Console 3 - 15
Write, Lock and Unlock RFID Tags
1.
Select Write, Lock/Unlock Tags from the Modify RFID Tags drop down menu, see Figure 3-15 on page 3-14 .
The Write, Lock and Unlock RFID Tags window appears.
Figure 3-16
Write, Lock and Unlock RFID Tags Window
2.
Enter the ID of the tag to be modified in the Select Tag ID . If the ID is not specified all the tags visible are
selected.
3.
Enter the access password if the modification to be performed is on locked Gen2 Tag(s). Access password
00000000 is the default setting.
4.
Select the antenna port (for the write/lock operation) from the Read Point drop-down list.
5.
If write is to be performed, select the write check box.
6.
Enter the data in Data to Write field.
7.
Select any of the following memory banks or fields:
EPC - The data is written in EPC bank from start word specified for Gen2 tags
USER - The data is written in user bank from start word specified for Gen2 tags. The data is written to user field of
tags from the 0th location. The start word is not applicable for legacy tags.
Reserved - The data is written in reserved bank from start word specified for Gen2 tags.
TID - The data is written in TID bank from start word specified for Gen2 tags.
NOTE
This window is used to write, lock and/or unlock Class0 & Gen2 tags, depending upon the type of device
and the air protocol setting for the read point.