manualshive.com logo in svg

Motorola XR400, Руководство по интеграции

Поделиться
Скачать
Motorola XR400 Скачать руководство пользователя страница 22

2 - 2

XR Series RFID Readers Integrator Guide

XR Series RFID Readers Ports

The available ports are:

XR450 Mono-Static Antenna Ports

Figure 2-2    

XR450 Mono-Static Ports

The XR450 RFID reader configuration includes four mono-static antenna ports and four bi-static antenna ports.

The mono-static support (up to four ports), allows the XR450 RFID reader to use only one antenna per read point 
for transmit/receive. This flexibility can decrease system cost and deployment complexity.

The four bi-static ports that can be utilized in either a mono-static or bi-static modes. This flexibility allows it to 
provide extended bi-static performance levels for the most challenging applications and environments.

The reader also provides dense reader mode support in either bi-static or mono-static mode, enabling reliable and 
efficient tag reads, in the most dense RF environments. This also eliminates interference issues associated with 
multiple RFID readers in close proximity.

Table 2-1    

XR Series RFID Readers Port Descriptions

Port

Description

Antenna 
(Reverse TNC)

Connect up to eight antennas - four transmit (TX), four receive (RX). Also use the four TX ports 
as TX/RX ports in single port mode. The XR450 RFID reader (only) configuration also includes 
four mono-static antenna ports.

10/100BaseT 
Ethernet

Insert a standard RJ45 Ethernet cable for connection to an Ethernet network. Insert a 
cross-connect Ethernet cable for connection to a local computer.

USB Client

For future expansion.

USB Host

For future expansion.

RS232

Insert an RS232 cable with a DB9 connector for serial console communications to a host.

Note: This port cannot be used to send data out to an external host. It is only used for local 
reader control.

GPIO

Insert a DE15 serial cable for connection to external devices.

Power

DC connector connects to a Motorola approved power supply AC adapter (varies depending on 
the country). Max power 24 VDC, 1.2 A.

Reset

Insert a paper clip into the hole, press and hold the reset button for more than 5 seconds. This 
resets the reader configuration to factory defaults, including the password.

TX4       TX3

TX2       TX1

RX4

RX3      RX2 RX1

MONOSTATIC PORTS

Содержание XR400































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды