Motorola WT41N0, Руководство интегратора

Страница: 41 / 172

Accessories 2 - 13
Four Slot Spare Battery Charger
This section describes how to set up and use the Four Slot Spare Battery Charger to charge up to four spare
batteries.
Figure 2-12
Four Slot Spare Battery Charger Setup
Spare Battery Charging
1.
Connect the charger to a power source.
2.
Insert the battery into a spare battery charging slot and press down on the battery to ensure proper
contact.
Figure 2-13
Spare Battery Charging
CAUTION
Ensure that you follow the guidelines for battery safety described in
Battery Safety Guidelines on page
9-3
.
CAUTION
Use only a Motorola approved power supply output rated 12 VDC and minimum 3.3 A. Use of an
alternative power supply will void the product warranty and may cause product damage. Refer to the
WT41N0 User Guide
for the power supply regulatory compliance statement.
Spare Battery Charge
Status LEDs (4)
Spare Battery Charging Well (4)