Motorola WT4090, Руководство интегратора

Страница: 87 / 206

Wireless Applications 5 - 21
Figure 5-26
Transmit Power Dialog Box (Ad-Hoc Mode)
Select
Next
to display the
Battery Usage
dialog box.
Battery Usage
Use the
Battery Usage
dialog box to select power consumption of the wireless LAN. There are three settings
available:
CAM
,
Fast Power Save
, and
MAX Power Save
. Battery usage cannot be configured in Ad-Hoc profiles.
Use the navigation keys to select an entry. Press
TAB
twice to highlight
Finish
.
Figure 5-27
Battery Usage Dialog Box
Table 5-16
Power Transmit Options (Ad-Hoc Mode)
Field Description
Full Select
Full
power for the highest transmission power level. Select
Full
power when operating in
highly reflective environments and areas where other devices could be operating nearby, or
when attempting to communicate with devices at the outer edge of a coverage area.
30 mW Select
30 mW
to set the transmit power level to 30 mW.
15 mW Select
15 mW
to set the transmit power level to 15 mW.
5 mW Select
5 mW
to set the transmit power level to 5 mW.
1 mW Select
1 mW
for the lowest transmission power level. Use this level when communicating with
other devices in very close proximity, or in instances where you expect little or no radio
interference from other devices.
NOTE
Power consumption is also related to the transmit power settings.