Motorola WT4090, Руководство интегратора, Страница: 149 / 206

Application Deployment 7 - 11
Sending the Hex Image Using IPL
Once the hex file is built, it can be downloaded to the wearable terminal using IPL.
WT4070/90
1.
Press the
1
,
9
and Power button. The wearable terminal performs a cold boot.
2.
The screen blanks and three brackets display “} } }”. Immediately press the
P2
key. The
Initial Program Loader
menu displays.
Figure 7-9
Initial Program Loader (IPL) Menu
3.
Choose Auto Select or use the up and down scroll buttons to select the partition to download, then press
Enter .
NOTE
The wearable terminal must be inserted in the cradle with appropriate power supply connected to a power
source, for the wearable terminal to reset into IPL.
Initial Program Loader
Platform
Application
Config Block
Windows CE
Monitor
Splash Screen
Power Micro
Partition Table
Command File
System Reset
Auto Select
CAUTION
To insure a successful download, do not remove power from the wearable terminal while in IPL mode.
NOTE
The hex images must be downloaded in the following order:
1. Monitor (wearable terminal resets after downloading monitor)
2. Config Block
3. Partition Table and Power Micro
4. Platform, Splash Screen, Application and Windows CE.
If the platform or application partition sizes are changed, you must download a new partition table first.