manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5 Скачать руководство пользователя страница 629

Statistics 12 - 23

13.2.7.1 Status

To view the RF Domain radio statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select the 

default 

item from under the System node on the top, left-hand side, of the screen.

3. Expand 

Radios 

from the RF Domain menu and select 

Status.

Figure 13-11

Radios - Status screen

The 

Radio Status

 screen displays the following:

Radio

Displays the name assigned to each listed RF Domain member access point 
radio. Each name displays as a link that can be selected to display radio 
information in greater detail.

Radio MAC

Displays the MAC address and numerical value assigned to each listed RF 
Domain member access point radio. 

Radio Type

Defines whether the radio is a 802.11b, 802.11bg, 802.11bgn, 802.11a, or 
802.11an.

Access Point

Displays the user assigned name of the RF Domain member access point to 
which the radio resides. AP-7131 models can have from 1-3 radios depending 
on the SKU. AP-6532 and AP-7161 models have 2 radios, while AP-6511 and 
AP-6521 models have 1 radio.

AP Type

Lists the model of each RF Domain member access point.

State

Displays the radio’s current operational state as On or Off.

Channel Current 
(Config)

Displays the current channel the RF Domain member access point radio is 
broadcasting on.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды