• If the radio is not compatible, the radio displays
Target radio incompatible
. Press the
Menu Select
button directly below
Ok
and the radio returns to the previous screen.
Once connected, the zone clone status is displayed on the right.
4
Press the
Menu Select
button directly below
Next
to accept the source zones selection. One of
the following scenarios occurs:
• If you select a single source zone, press the
Menu Select
button directly below
Sel
to select
the target zones for cloning.
• If you select multi-source zones, the radio displays
Confirm target
and shows the
automatically selected target zones and source zones mapping.
• If the selected multi-source zones exceed the last clonable target zone, the radio displays
<#> src zones unselected
and
Sel exceed max tgt zone
alternatively.
5
Press the
Menu Select
button directly below
Clon
to begin cloning.
The radio displays
Enter password
if the protected target zone is selected.
6
Enter the password and press the
Menu Select
button directly below
Ok
to start cloning.
The radio displays
Cloning…<Current cloning zone>
. One of the following scenarios occurs:
• If the cloning is successful, a tone sounds, the radio displays
Clone successful
and the source
zone alias is displayed on the right.
• If the cloning is not successful, a tone sounds and the radio displays
Clone failed
. Press the
Back
button to enter the source zone list.
• If you press the
Home
button, the radio aborts cloning.
NOTICE:
The target radio enters programming mode during cloning and resets after cloning is
completed.
6.2
Contacts
This feature provides “address-book” capabilities on your radio. Each entry corresponds to an alias
(name) and ID (number) that you use to initiate a call. Contact entries are alphabetically sorted
according to entry alias.
Also, each entry, depending on context (conventional or phone), associates with one or up to five IDs
according to the following types of calls:
• Selective Call
• Call Alert
Each entry within Contacts contains the following information:
• Call Alias (Name)
• Call ID (Number)
• Call Type (Icon)
• System ID
NOTICE:
Your radio must be preprogrammed to allow you to add, edit, or delete the contact
entries.
Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs.
NOTICE:
Your radio is preprogrammed with a few contacts per Call Lists. Check with your
dealer or system administrator for more information.
MN003602A01-AF
Advanced Features
45
