If no acknowledgment is received, you hear a low-pitched tone and the display shows
No
acknowledge
.
4
Press
to return to the
Home
screen.
6.1.4
Making a Priority Dispatch Calls
If a talkgroup is congested, the Priority Dispatch feature allows you to call the dispatcher on a different
talkgroup. This talkgroup is called the Priority Talkgroup. Each trunking talkgroup can have its own
assigned Priority Talkgroup.Priority Dispatch is not available during Emergency operations. Scan
feature is suspended when Priority Dispatch is initiated.
Prerequisites:
Dispatch console that supports this feature must be preprogrammed to use this feature.
Check with your dealer or system administrator for more information on dispatch console supporting
this feature.
Procedure:
1
Press the preprogrammed
Priority Dispatch
button.
A tone sounds and the radio enters Priority Dispatch mode. The radio exits this mode when the
Priority Dispatch Time Out Timer expires.
2
Before the Priority Dispatch Time Out Timer expires, press and hold the
PTT
button to transmit.
The display shows the Priority Talkgroup alias.
3
Release the
PTT
button to listen.
The radio exits Priority Dispatch mode, returns to its original talkgroup, and displays the home
channel alias.
6.1.5
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels.
NOTICE:
Your radio must be preprogrammed for you to use this feature. At least one zone in
the radio must be a non-dynamic zone.
6.1.5.1
Entering the Dynamic Zone to Select a Dynamic Channel
Procedure:
1
or to
Zone
then press the
Menu Select
button directly below
Zone
.
The display shows the
Zone
screen.
2
or
to
<# Dynamic Zone Channels>
.
2
3
Perform one of the following actions:
• Press the
Menu Select
button below
Sel
to select.
2
# indicates number of the channel on the 16-Position Switch which are numbered from 1 to 16.
MN003602A01-AF
Advanced Features
42
