You Hear
Tone Name
Heard
Two High-
Pitched
Tones
GPS Fails
When the GPS fails or loses signal.
Ringing
Phone Call Received
When a land-to-mobile phone call is received.
Unique,
Low-Pitch-
ed Chirp
New Message
When a new message is received.
Unique,
High-Pitch-
ed Chirp
Priority Status
When a priority message is received.
4.7
Phone Call Displays and Alerts
The following phone call displays and alerts appears on the radio display when you make and receive
phone calls. The radio also uses alert tones to indicate the current status.
You Hear
You See
When
Notes
A Long
Tone
No phone
You press the PTT
button and the phone
system is not availa-
ble.
Press
to hang up. The radio re-
turns to the Home screen.
Phone
busy
The phone system is
busy.
Press
to exit the phone mode and
try your call later.
A Busy
Tone
Phone
busy
When a channel is not
available.
The radio automatically connects
when a channel opens.
–
No ac-
knowledge
The call is not ac-
knowledged.
Press
to hang up. The radio re-
turns to the Home screen.
A High-
Pitched
Tone
–
When you release the
PTT button.
The radio indicates to the landline par-
ty that the caller may begin talking.
NOTICE:
You have the option of sending additional digits (overdial), such as an extension
number, credit card, or PIN numbers to the phone system. If the radio is preprogrammed for live
overdial, every digit entered after the call is connected, is sent to the phone system.
If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory
and then sent when the
PTT
button is pressed. Press the
PTT
button to send either digits or
voice, but not both at the same time.
4.8
Display Color Change On Channel
This feature provides visual channel identification for users to have a quick visual recognition on a
particular channel.
Your radio must be preprogrammed to allow you to use this feature.
When changing channels, the radio backlight on top display, radio keypad, and accessories (DRSM)
changes to the preprogrammed color.
MN003602A01-AF
Status Indicators
32
