Motorola VMM6300, Руководство пользователя

Страница: 26 / 58

Chapter 3: Device Configuration
Enabling the DHCP Server and Assigning Addresses
The following procedure describes how to enable the local DHCP server residing on the VMM and
assign an address range from within MeshManager’s DeviceManager screen.
Procedure 3-1 Enabling the VMM resident DHCP Server
1
Within the MeshManager software screen, double-click on a specific VMM (6300 or 7300 series) in the
device tree.
If MeshManager is able to communicate with the device, the top of the right pane (in MeshManager) will
be updated to show two smaller panes, (one for each of the two main components of the device).
Figure 3-1 VMM Status
2
Within the MeshManager software screen, in the Config 2.4 QDMA Host ... section, select the Action
drop-down and choose the Configuration item from the list.
Figure 3-2 Selecting QDMS Host Configuration
6881011Y54-A
3-2
September 2005