Using Your Baby Monitor
13
Please read these instructions carefully, and be aware that this baby monitor is only
intended as an aid. It is not a substitute for responsible, correct parental supervision.
3.1
Power on or off the Baby Unit
Slide the Power ON/OFF switch to turn on the Baby Unit. The
Power/Link indicator
light turns on.
Slide the Power ON/OFF switch to turn off the Baby Unit. The
Power/Link indicator
light turns off.
3.2
Power on or off the Parent Unit
Press and hold
0
to turn on the Parent Unit. The
Power indicator
light turns on.
Press and hold
0
again to turn off the Parent Unit. The
Power indicator
light turns off.
NOTE
If you place the parent and Baby Units too close together, you may hear a high
pitched noise. This is not a fault. The units are designed to be operated at some
distance apart, e.g. in separate rooms, so move the units further apart.
3.3
Turn off the Parent Unit screen
You can turn on or off the Parent Unit screen without powering off the Parent
Unit. You can still hear sound from the Baby Unit.
Press
0
on the Parent Unit to turn off the screen.
Press any key on the Parent Unit to turn on the screen again.
3.4
Adjust the speaker volume for Parent Unit
You can adjust the speaker volume from
Volume 1
to
Volume 5
, or turn it off.
Press
or
on the Parent Unit when it is not in use.
When the speaker volume is set to off, the screen displays
.
3.5
Adjust the LCD brightness of the Parent Unit
You can adjust the brightness of the Parent Unit screen from
Level 1
to
Level 5
.
1.
Press
when the Parent Unit is not in use.
is displayed.
2.
Press
or
to adjust the brightness.
3.
Press
O
to confirm your selection.
3. Using the Baby Monitor
