Motorola TETRA MTM800, Руководство пользователя по функциям

Страница: 161 / 382

153
M
e
ssages
Sending a Predefined Template
1. Press Send , PTT , or , or the relevant one-touch numeric
key to send the message.
2. The display will show one of the following delivery reports:
• Message Delivered — to indicate that the message
was successfully sent and received.
• Message Failed — the message was not received.
3. After sending the message, your MTM800 Enhanced will
return to the predefined template list or to the message
editor screen.
Sending a Status Message to a Group
1. Switch to the desired talkgroup, to which you want to send
a status message.
2. From the main menu, select Messages > Send Status .
3. In this example,
Lunch
is the last sent
status. If you wish to send a different
status, scroll to your selection in the list
of pre-programmed statuses, or key
the status number. To stop scrolling,
press
Back . The display returns to the
select status list.
4. Press the Menu button to view the status message. Press
Back to return to the status list.
5. Press Select , then press PTT or , or the relevant one-
touch numeric key to send the status message.
Sending Message to a Group
You can send the message to a Group by selecting its GSSI
in address book or entered by keypad.
A predefined message address is also defined by your Service
Provider during programming and cannot be changed.
It is recommended to wait for the message acknowledge before
sending a new message.
1) Lunch
2) Dinner
3) Meeting
Select
Back
Select Status