Motorola TETRA MTM800, Руководство пользователя по функциям

Страница: 117 / 382

109
Th
e Menu
Security
From the main menu, select > Security
or > More... > Security (see the note on
page 105).
PIN Protect
Network access protection is configured by your Service
Provider:
• No access to network operation — you can only send or
receive Emergency Calls and adjust the volume level. Unit
lock takes effect at the next power on.
To protect access to network operation:
1. From the main menu, select > Security > PIN Protect . On
is highlighted.
2. Press Select .
3. At the Code? prompt enter the 4-digit code (factory setting
0 0 0 0). To avoid disclosure of the code, asterisks are
displayed instead of the code digits. The display will show
the following message:
Unit Locked — you entered the correct code. The display
returns to the Security sub-menu and shows the active
setting:
On
.
To unlock the MTM800 Enhanced before powering off:
1. From the main menu, select > Security > PIN Protect . Off
is highlighted.
2. Press Select .
3. At the Code? prompt enter the 4-digit code.The display will
show the following message:
Unit Unlocked — You entered the correct code. The display
returns to the Security sub-menu and shows the active
setting:
Off
.
PIN Protect
Change Code
Keylock
Air Encrypt
K Validity
Covert Mode
Back
Select
Security