Motorola TETRA MTM5000 Series Скачать руководство пользователя

Страница: 98 / 152

4.7.7.1

Setting Font Level

When and where to use:

To increase or decrease text size so you can adjust the interface readability

to existing conditions.

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Display

→

Font Level

Select one of the following options:

•

– Default size of the text.

•

– Large size of the text. Keep in mind that less text can be displayed.

In some languages, the number of available font levels can be decreased.

4.7.7.2

Setting Large Idle Font

When and where to use:

To enable/disable large font on the home screen.

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Display

→

Large Idle Font

Select

to enable, or

Off

to disable displaying large font on the home screen.

NOTE:

Large Idle Font is not available in some languages.

4.7.7.3

Setting Extended Status Icons

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Display

→

Extended Status Icons

Select one of the following:

•

Disabled

– the radio always displays icons in normal size.

•

Idle Only

– the radio displays enlarged icons only on the home screen.

•

Always

– the radio displays enlarged icons both on the home screen and when browsing

though the radio menu.

4.7.7.4

Setting Screen Saver

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Display

→

Screen Saver

Select one of the following options:

•

Activate

– To activate/deactivate this feature.

68015000180-MR
Chapter 4 : Main Menu

Содержание TETRA MTM5000 Series
























































































































































Результаты поиска

Содержание TETRA MTM5000 Series

Отзывы:

Похожие инструкции для TETRA MTM5000 Series

Бренды по названию

Популярные бренды

Motorola TETRA MTM5000 Series, Руководство пользователя

Результаты поиска

Содержание TETRA MTM5000 Series

Отзывы:

Похожие инструкции для TETRA MTM5000 Series

Бренды по названию

Популярные бренды