Motorola TEAM Badge (EWB100), Руководство по развертыванию

Страница: 84 / 146

EWB100 Usage and Deployment Guide Rev 1.13
Page 84
set airbeam port_ab xx
where xx is the TCP port number. It is a 16 bit decimal number.
The default is: 50555
16.5.6 User Default Airbeam FTP Port
This command is the user defined default version of the airbeam FTP port
comand. The command is:
set airbeam def_ab_port_ab xx
16.5.7 Airbeam server name
This command specifies the DNS name of the Airbeam FTP server. If specified
the name will be resoled using DNS. Note that the name may either partially or
fully qualified. If the network parameter “append” is enabled, then the name
supplied here will be prepended the domain name provided by DHCP. If the
name here is fully qualified and append is enabled, the results may not be what
was expected.
set airbeam server xx
Where xx is the DNS name of the server.The default is null.
16.5.8 User Default Airbeam server name
This command is the user defined default version of the Airbeam server name
comand. The command is:
set airbeam def_server xx
16.5.9 Airbeam user name
This command specifies the user name for logging into the Airbeam FTP server.
set airbeam user xx
where xx is the user name. The default is the MAC address of the device.
16.5.10 User Default Airbeam user name
This command is the user defined default version of the Airbeam user name
comand. The command is:
set airbeam def_user xx
16.5.11 Airbeam user password
This command specifies the user password for logging into the Airbeam FTP
server. The command is:
set airbeam password xx
where xx is the user password.
The defau
lt is “motorola”.