Motorola ST7500 Скачать руководство пользователя страница 111

Страница: 111 / 138

4.15

Networks

This menu item allows you to switch between the radio operation modes.

4.15.1

Selecting Network Operation Mode

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Networks

Select one of the following options:

•

Network Sel

– Selects the network to which the radio is allowed to register.

•

Trunked Mode

– Switches to the mode using infrastructure.

•

Direct Mode

– Switches to the mode without using infrastructure.

•

Repeater Mode

– Switches to the Repeater Mode.

•

DMO Config

– Only available in Direct Mode. See

Selecting DMO Communications Options

on page 60

•

TXI Mode

– Select

Activate

to stop sending any radio transmission.

NOTICE:

If the radio is in

TXI Mode

, it is not possible to switch from

Direct Mode

Trunked Mode

NOTICE:

If the radio is in

TXI Mode

, it is not possible to switch from

Direct Mode

Trunked Mode

Repeater Mode

•

TG Net Sel

– Selects one or multiple networks determined by the selected talkgroup.

4.16

Crypto Menu

This sub-menu allows you to manage SIM card based End-to-End Encryption.

The End-to-End Encryption is used for:

• Encryption of voice transmission in the DMO and TMO Modes.

• Encryption of messages transmission in the TMO Mode.

• Encryption of messages transmission in the DMO Mode (the radio cannot be in call).

• Encryption of position data (GPS) transmission in the TMO and DMO Modes.

• Transfer of Operational Tactical Address (OPTA) in the TMO and DMO Modes.

• Management of encryption keys in the TMO Mode.

4.16.1

Enabling or Disabling SIM Card End-to-End Encryption

Prerequisites:

Ensure that:

• The SIM card is inserted in the radio.

MN004519A01-AK

Chapter 4: Main Menu

111

Содержание ST7500










































































































































Результаты поиска

Содержание ST7500

Отзывы:

Похожие инструкции для ST7500

Бренды по названию

Популярные бренды

Motorola ST7500, Руководство пользователя по функциям

Результаты поиска

Содержание ST7500

Отзывы:

Похожие инструкции для ST7500

Бренды по названию

Популярные бренды