Motorola SL1M Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 89

Motorola SL1M Скачать руководство пользователя страница 22

1-2

Introduction

: Radio Description

1.2.1

Radio Overview

Figure 1-1. Display Model

• ON/OFF/INFORMATION BUTTON – Long press to turn the radio on or off. Short press once to

show the Radio Signal Strength Index (RSSI) and the battery level, and short press twice to
show the radio name.

• LED INDICATOR – Red, Green and Orange light-emitting diodes indicate operating status.
• SIDE PROGRAMMABLE BUTTON – Field programmable button using the CPS.
• CHANNEL SELECTOR SWITCH – Toggle down to increase the channel and toggle up to

decrease the channel.

• VOLUME BUTTON – To adjust speaker volume, and to select the action list when the side

programmable button is pressed to call out the action list selections.

• PUSH-TO-TALK (PTT) BUTTON– Press to execute voice operations (e.g. Group call and

Private Call).

• ANTENNA – Provides the needed RF amplification when transmitting or receiving.
• MICROPHONE – Allows voice to be sent when PTT or voice operations are activated.
• ACCESSORY CONNECTOR – Interface point for audio accessories to be used with the radio.
• USB – Programs the radio through a computer, and charges the radio through a wall charger or

a computer.

• SPEAKER – Outputs all tones and audio generated by the radio (e.g. features such as keypad

tones and voice audio).

• CHARGING CONTACT – Contact point for the standard multi-unit and single unit charger.

LED Indicator

Push-to-Talk (PTT) Button

On/Off/Information Button

Side Programmable Button

Antenna

Channel Selector Switch

Volume Up Button

Accessory Connector

Microphone

Micro USB Connector

Volume Down Button

Speaker

Charging Contact

Final Draft

«
...
20
21
22
23
24
...
»

Содержание SL1M


























































































Отзывы:

Нет отзывов