manualshive.com logo in svg

Motorola RS507 Series, Руководство по продукции, Страница: 27 / 263

Поделиться
Скачать
Motorola RS507 Series Скачать руководство пользователя страница 27

1 - 12 RS507 Hands-Free Imager Product Reference Guide

Figure 1-12    

Pairing Bar Code Example as Shown on the Mobile Computer Screen

5.

The Scan LED starts flashing green indicating that the Imager is attempting to establish connection with a 
mobile computer.

6.

When connection is established, the Scan LED turns off and the Imager emits one string of low/high beeps. 
The Imager is connected and ready for scanning.

Restore Lost Bluetooth Connection

The Imager maintains Bluetooth communication with a mobile computer within a range of 10 meters (30 feet). 
When the Imager fails to establish connection or connection is lost during operation, the Imager emits one string of 
high/low beeps.

To reestablish the Bluetooth connection with a mobile computer:

1.

Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile computer.

2.

Ensure that the mobile computer is on and “awake” (not in Suspend mode).

3.

The Imager automatically attempts reconnecting to the mobile computer for 30 seconds (Scan LED flashes 
green). If automatic re-connection fails, verify that the Imager is within Bluetooth range and briefly press the 
Restore Key on the Imager to reconnect.

4.

The Scan LED starts flashing green indicating that the Imager is attempting to establish connection with a 
mobile computer. The Scan LED turns off and the Imager emits one string of low/high beeps indicating that the 
Imager is connected and ready for scanning.

Remove Bluetooth Connection

Remove Bluetooth connection to allow the Imager to connect to another mobile computer or to enable the a mobile 
computer to accept the connection from another Imager.

NOTE

If the Imager default PIN code is required for establishing connection, enter the following code: "12345". 
You may also need to set the authentication and encryption to Enabled.

NOTE

When replacing the Imager battery, the Imager memory retains the pairing information of the last paired 
mobile computer.

NOTE

You can also reconnect by scanning a pairing bar code from the mobile computer screen or provided 
label. When scanning, the Imager emits one string of high/low/high/low beeps.

NOTE

Removing Bluetooth connection is only required if the Imager is configured to auto-connect upon 
power-up (permanent pairing is enabled) and has to be paired with a different mobile computer.

Содержание RS507 Series








































































































































































































































































Отзывы:

Нет отзывов