
English
30
GE
TTING ST
ARTE
D
TALK RANGE
To establish a proper two-way communication, the
channel, frequency, and interference eliminator codes
must be the same on both radios. This depends on
the stored profile that has been preprogrammed on
the radio:
1.
Channel:
Current channel that the radio is
using, depending on radio model.
2.
Frequency:
The frequency the radio uses to
transmit/receive.
3.
Interference Eliminator Code:
These codes
help minimize interference by providing a
choice of code combinations.
4.
Scramble Code:
Codes that make the
transmissions sound garbled to anyone
listening who is not set to that specific code.
5.
Bandwidth:
Some frequencies have selectable
channel spacing, which must match other
radios for optimum audio quality.
For details on how to set up frequencies and CTCSS/
DPL codes in the channels, refer to “Advanced
Configuration Mode” on page 36.
TALK RANGE
Model
Industrial
Multi-Level
Inside steel/
concrete Industrial
buildings
Inside multi-
level buildings
UHF 4W
Up to 350,000 ft2
Up to 30 Floors
MN002894A01_final.book Page 30 Wednesday, January 4, 2017 5:32 PM