Motorola MVME712A, Инструкция по установке и эксплуатации

Страница: 35 / 80

2-18 Computer Group Literature Center Web Site
Preparing and Installing the Hardware
2
3. Remove the filler panel(s) from the appropriate card slot(s) at the
rear of the chassis (if the chassis has a rear card cage). Other
modules in the unit may have to be moved to allow space for the
cables connected to the P2 adapter and the MVME712M.
4. Continue the installation procedure by choosing one of the
configurations listed in the following table, and described on the
following pages.
Note that the designations A through F are used solely as convenient
references.
Table 2-4. Cabling configurations
Configuration
Internal SCSI
Devices
External SCSI
Devices
Pages
A X 2-19 , 2-20
B X 2-21 , 2-22
B1 X 2-23 , 2-24
C X X 2-25 , 2-27
C1 X X 2-28 , 2-29
D X X 2-30 , 2-32
E X 2-33 , 2-34
F X 2-35 , 2-37