D-2
Troubleshooting the MVME230x
D
Table D-1. Troubleshooting MVME230x Modules
Condition
Possible Problem
Try This:
I. Nothing works,
no display on
the terminal.
A. If the
CPU
LED
is not lit, the
board may not
be getting
correct power.
1. Make sure the system is plugged in.
2. Check that the board is securely installed in its backplane
or chassis.
3. Check that all necessary cables are connected to the board,
per this manual.
4. Check for compliance with Installation Considerations, per
this manual.
5. Review the Installation and Startup procedures, per this
manual. They include a step-by-step powerup routine. Try
it.
B. If the LEDs are
lit, the board
may be in the
wrong slot.
1. The VME processor module should be in the Þrst
(leftmost) slot.
2. Also check that the Òsystem controllerÓ function on the
board is enabled, per this manual.
C. The Òsystem
consoleÓ
terminal may
be conÞgured
incorrectly.
ConÞgure the system console terminal per this manual.
II. There is a
display on the
terminal, but
input from the
keyboard
and/or mouse
has no effect.
A. The keyboard or
mouse may be
connected
incorrectly.
Recheck the keyboard and/or mouse connections and
power.
B. Board jumpers
may be
conÞgured
incorrectly.
Check the board jumpers per this manual.
C. You may have
invoked ßow
control by
pressing a
HOLD
or
PAUSE
key, or by
typing
:
<CTRL>
-
S
Press the
HOLD
or
PAUSE
key again.
If this does not free up the keyboard, type in:
<CTRL
>-
Q
Содержание MVME2301
