Motorola MVME162P-244 Series, Инструкция по установке и эксплуатации

Страница: 15 / 146

xv
About This Manual
MVME162P4 VME Embedded Controller Installation and Use provides
instructions for hardware preparation and installation; a board-level
hardware overview; and firmware-related general information and startup
instructions for the MVME162P-244 and -344 series of embedded
controllers, known collectively as the ‘‘MVME162P4’’ because they are
equipped with the “Petra” chip and accommodate up to four IP modules.
The “Petra” chip that distinguishes MVME162P4 embedded controllers is
an application-specific integrated circuit (ASIC) which combines the
functions previously covered by the MC2 chip, the IP2 chip, and the
MCECC chip in a single ASIC. As of the publication date, the information
presented in this manual applies to the following MVME162P4 models:
If the part number of your board includes a "PA" (for example:
MVME162PA-244L), your board is equipped with a second-generation
Petra ASIC. All other particulars of the board remain the same.
This manual is intended for anyone who designs OEM systems, adds
capability to an existing compatible system, or works in a lab environment
for experimental purposes. A basic knowledge of computers and digital
logic is assumed. To use this manual, you may also wish to become
familiar with the publications listed in the Related Documentation section
in Appendix E.
Model Number Characteristics
MVME162P-244L 25MHz 68LC040, 16MB SDRAM, 2 SIO, 4 DMA IP
MVME162P-244LE 25MHz 68LC040, 16MB SDRAM, 2 SIO, 4 DMA IP, Ethernet
MVME162P-244LSE 25MHz 68LC040, 16MB SDRAM, 2 SIO, 4 DMA IP, SCSI/Ethernet
MVME162P-344 32MHz 68040, 16MB SDRAM, 2 SIO, 4 DMA IP
MVME162P-344S 32MHz 68040, 16MB SDRAM, 2 SIO, 4 DMA IP, SCSI
MVME162P-344E 32MHz 68040, 16MB SDRAM, 2 SIO, 4 DMA IP, Ethernet
MVME162P-344SE 32MHz 68040, 16MB SDRAM, 2 SIO, 4 DMA IP, SCSI/Ethernet