Motorola MVME162P-244 Series, Инструкция по установке и эксплуатации

Страница: 84 / 146

3-14 Computer Group Literature Center Web Site
162Bug Firmware
3
Memory Search Increment Size 00010000 Multi-CPU feature used to offset the location
of the Bug work page. This must be a multiple
of the debugger work page, modulo $10000
(64KB). Typically, Memory Search Increment
Size is the product of CPU number and size of
the Bug work page. Example: first CPU $0 (0 x
$10000), second CPU $10000 (1 x $10000),
etc.
Memory Search Delay Enable
[Y/N] N No delay before the Bug begins its search for a
work page.
Memory Search Delay Address FFFFD20F Default address is $FFFFD20F. This is the
MVME162P4 GCSR GPCSR0 as accessed
through VMEbus A16 space; it assumes the
MVME162P4 GRPAD (group address) and
BDAD (board address within group) switches
are set to "on". This byte-wide value is
initialized to $FF by MVME162P4 hardware
after a System or Power-On reset. In a multi-
162P4 environment, where the work pages of
several Bugs reside in the memory of the
primary (first) MVME162P4, the non-primary
CPUs will wait for the data at the Memory
Search Delay Address to be set to $00, $01, or
$02 (refer to the Memory Requirements section
in Chapter 3 for the definition of these values)
before attempting to locate their work page in
the memory of the primary CPU.
Memory Size Enable [Y/N] Y Memory is sized for Self-Test diagnostics.
Memory Size Starting Address 00000000 Default Starting Address is $0.
Memory Size Ending Address 00100000 Default Ending Address is the calculated size
of local memory.
Table 3-3. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default