Motorola MVME162 Скачать руководство пользователя страница 75

Страница: 75 / 106

Memory Maps

MVME162/D2

3-23

11. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the serial port 2 personality board in ASCII format.

12. Eight bytes are reserved for the serial number assigned to the serial port 2

personality board in ASCII format.

13. Eight bytes are reserved for the board identifier, in ASCII format, assigned

to the optional first IndustryPack a.

14. Eight bytes are reserved for the serial number, in ASCII format, assigned

to the optional first IndustryPack a.

15. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the optional first IndustryPack a.

16. Eight bytes are reserved for the board identifier, in ASCII format, assigned

to the optional second IndustryPack b.

17. Eight bytes are reserved for the serial number, in ASCII format, assigned

to the optional second IndustryPack b.

18. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the optional second IndustryPack b.

19. Eight bytes are reserved for the board identifier, in ASCII format, assigned

to the optional third IndustryPack c.

20. Eight bytes are reserved for the serial number, in ASCII format, assigned

to the optional third IndustryPack c.

21. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the optional third IndustryPack c.

22. Eight bytes are reserved for the board identifier, in ASCII format, assigned

to the optional fourth IndustryPack d.

23. Eight bytes are reserved for the serial number, in ASCII format, assigned

to the optional fourth IndustryPack d.

24. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the optional fourth IndustryPack d.

25. Growth space (65 bytes) is reserved. This pads the structure to an even 256

bytes.

26. The final one byte of the area is reserved for a checksum (as defined in the

MVME162Bug Debugging Package User’s Manual) for security and data
integrity of the configuration area of the NVRAM. This data is stored in
hexadecimal format.

Содержание MVME162











































































































Результаты поиска

Содержание MVME162

Отзывы:

Похожие инструкции для MVME162

Бренды по названию

Популярные бренды

Motorola MVME162, Руководство пользователя

Результаты поиска

Содержание MVME162

Отзывы:

Похожие инструкции для MVME162

Бренды по названию

Популярные бренды