Motorola MVME162, Руководство пользователя

Страница: 22 / 106

General Information
1-8 MVME162 Embedded Controller User’s Manual
1
256 Kbit x 8; 512 Kbit x 8; 1 Mbit x 8) organized as a 512Kbit x 8 device. A
jumper allows reset code to be fetched either from Flash memory or from the
EPROM.
IndustryPack Modules
Up to four IndustryPack (IP) modules may be installed on the MVME162. The
interface between the IPs and MVME162 is the IndustryPack Interface
Controller (IPIC) ASIC. Access to the IPs is provided by four 3M connectors
located behind the MVME162 front panel.
Optional SCSI Interface
An NCR 53C710 coprocessor provides the SCSI interface for the MVME162.
Optional LAN Ethernet Transceiver Interface
An Intel 82596CA controller provides the LAN Ethernet transceiver interface
for the MVME162.
Required Equipment
The following equipment is required to complete an MVME162 system:
❏
System console terminal
❏
Disk drives and controllers
❏
Operating system
❏
MVME712 series transition module (MVME712-12, MVME712-13,
MVME712A, MVME712AM, MVME712B, or MVME712M); P2 Adapter
Board or LCP2 Adapter Board; and cable
N
ote
The MVME712B is an optional device used with MVME712-
12, MVME712-13, MVME712A, and MVME712AM modules
only.
MVME162Bug Firmware
The 162Bug package, MVME162BUG, is a powerful evaluation and debugging
tool for systems built around the MVME162 CISC-based microcomputers.
Facilities are available for loading and executing user programs under
complete operator control for system evaluation. 162Bug includes commands
for display and modification of memory, breakpoint and tracing capabilities,
a powerful assembler/disassembler useful for patching programs, and a self-