manualshive.com logo in svg

Motorola MTP830, Руководство пользователя, Страница: 45 / 108

Поделиться
Скачать
Motorola MTP830 Скачать руководство пользователя страница 45

Note: 

If the R

OTARY

 K

NOB

 mode is set to 

Scroll

, then you do not need to press it to enter the scrolling

mode.

Note: 

Your radio can have an access up to three levels of the folder structure.

Making Group Calls in DMO

The Group Call is received by all members of the selected group who have their units turned on and are in range.

Procedure:

1

Press and hold the PTT button.

2

Wait for the 

Talk Permit

 tone (if configured) and then speak into the microphone. Release the PTT button to

listen.

Receiving Group Calls in Idle

Procedure:

1

The radio receives a Group Call.

Note: 

The incoming Group Call is signalled by a 

Receiving Group Call

 tone.

2

To respond, press and hold the PTT button.

Private Call

The Private Call, also called point-to-point, or individual call, enables calling between two individuals. No other radio
can hear the conversation. This call type can be carried out in two ways:

• Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time.
• Simplex call, in TMO or DMO Mode. Only one party can speak at a time.

When a DMO Private Call takes place, radios not involved in this call receive the channel busy indication. The radios
are identified using its radio numbers.

Related Links

Emergency Individual Calls (Private or MS-ISDN)

 on page 50

Making Private Calls

Prerequisites: 

Direct Private Number Dialing is assigned to the right N

AVIGATION

 key.

Procedure:

1

From the home screen, press and hold the right N

AVIGATION

 key and enter a number.

2

If 

Private

 is not the first type of call presented, press 

Ctype

 repeatedly to select it.

3

When you are in the following mode:

a

TMO — For simplex calls, press and release the PTT button. You hear a ringing tone. Otherwise, press and
hold the PTT button. Wait for the talk permit tone before talking, and release the PTT button to listen. For
duplex calls, press and release the S

END

 key. You hear a ringing tone.

b

DMO — Only simplex calls are available. Press and hold the PTT button. Wait for the talk permit tone before
talking, and release the PTT button to listen.

4

To end the call, press the E

ND

 key.

Modes | 

45

 |   | 

 Send Feedback

Содержание MTP830













































































































Отзывы:

Нет отзывов