Motorola MTP830 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 108

background image

Feature

Description

GPS Report

Sends a message with the radio’s GPS location to a dedicated
address.

Hi/Low Audio

Toggles high/low audio.

PABX Call

Initiates a PABX call to a predefined entry in the contact list.

Phone Call

Initiates a phone call to a predefined entry in the contact list.

Previous Talkgroup

Changes the selected talkgroup of the radio to the talkgroup (DMO or
TMO) that was selected previously.

Private Call

Initiates a private call (simplex or duplex) to a predefined entry in the
contact list or to the last group call originator.

Rotary Switches Lock/Unlock

Locks/unlocks the Rotary Switches.

Screen Saver Activation

Turns on/off the Screen Saver feature.

Scroll Audio Profiles

Scrolls through all available audio profiles.

Sending Predefined Message

Sends a predefined message to a dedicated address.

Sending Status

Sends a dedicated status message to a dedicated address.

Sending User Defined Message

Sends a user defined message to a dedicated address.

Speaker Enable/Disable Per Call

Enables the loudspeaker for a duration of the ongoing call..

Timed Talkgroup Change

Makes a predefined talkgroup the selected talk group for a specified
amount of time. While using the predefined talkgroup, the second
press of the One-Touch Button results in: returning to the previously
selected talkgroup, restarting the predefined time, or no action
(depending on configuration). After the timer expires, the radio
returns to the previously selected talkgroup.

TMO / DMO Switch

Toggles between TMO and DMO modes.

TMO Talkgroup Scan

Turns on/off the Talkgroup Scan feature in TMO Mode.

Transmit Inhibit Mode (TXI)

Turns on/off the Transmit Inhibit Mode.

Volume Down

• Press to decrease the volume by one level.
• Press and hold to continuously decrease the volume to its

minimum level.

Volume Up

• Press to increase the volume by one level.
• Press and hold to continuously increase the volume to its

maximum level.

Your service provider can assign one-touch functions only to the side buttons and keypad keys.

Terminal Temporary Disable/Enable

Your radio is provided with a feature that allows your service provider to disable it temporarily in case it is stolen.
When your radio is disabled or is powered up in disabled state, it looks and acts like it is turned off.

If your radio is found, your service provider can enable it again over the air. After your radio is enabled, you may
resume normal operation.

34

| Getting Started

«
...
32
33
34
35
36
...
»

Содержание MTP830













































































































Отзывы:

Нет отзывов

Похожие инструкции для MTP830

Бренд: i-box Страницы: 18

Бренд: SOUNDMASTER Страницы: 6

SOUND-BOX HR100

Бренд: Sentry Страницы: 4

Бренд: Karma Страницы: 2

Бренд: GE Страницы: 31

Бренд: GE Страницы: 8

Бренд: Noblex Страницы: 15

Бренд: Sangean Страницы: 1

Бренд: Sangean Страницы: 1

Бренд: Sangean Страницы: 16

Бренд: Sangean Страницы: 32

Бренд: Denver Electronics Страницы: 5

Бренд: Denver Страницы: 2

Бренд: Magnavox Страницы: 7

Бренд: jWIN Страницы: 6

Бренд: Tait Страницы: 24

Бренд: Tait Страницы: 46

Бренд: Panther Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды