4.13.1
Selecting Network Operation Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks.
3 Select one of the following:
•
Network Sel — Selects the network to which the radio is allowed to register.
•
Trunked Mode — Switches to the mode using infrastructure.
•
Direct Mode — Switches to the mode without using infrastructure.
•
TXI Mode — Select Activate to stop sending any radio transmission.
NOTICE: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to
Trunked Mode.
4.13.2
Network Select
This sub-menu item allows you to select a network to register your radio. Network Sel is available only
in TMO or Gateway mode, otherwise your radio display
Service Restricted
message.
4.13.2.1
Selecting Your Network
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks
→
Network Sel
→
Home Only.
Your radio registers to the home network.
4.13.2.2
Using Select Net Registration
Procedure:
1 From the home screen, press the Menu key.
2 Select More . . .
→
Networks
→
Network Sel
→
Select Net.
3 Select the required network from the list.
Your radio registers to the selected network.
4.13.2.3
Using Any Network Registration
When and where to use: Your radio has lost its home network coverage and wants to increase the
number of networks it can scan and register.
Procedure:
1 From the home screen, press the Menu key.
6866588D06–RB
Chapter 4: Main Menu
96
Содержание MTP810Ex
