Motorola MTP810Ex, Руководство пользователя по функциям

Страница: 101 / 126

After accepting the call, the radio transmits in a simplex call without any action from or indication to the
user. The Ambience Listening Call automatically ends when you initiate any voice call, switch to
Emergency or TXI Mode, or send Emergency Alarm.
5.6
Private Call
Private Call, also called Point-to-Point, or individual call, enables calling between two individuals. No
other radio can hear the conversation. This call type can be carried out in two ways:
• Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time. Start the
conversation using the Send key.
• Simplex call, in TMO or DMO Mode. Only one party can speak at a time. Start the conversation
using the PTT button.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy
indication. The radios are identified using its radio numbers.
5.6.1
Making Private Calls
Prerequisites:
Direct Private Number Dialing is assigned to the Right Navigation key.
Procedure:
1 From the home screen, press and hold the Right Navigation key and enter a number.
2 If Private is not the first type of call presented, press Ctype repeatedly to select it.
3 When you are in the following mode:
• TMO — For simplex calls, press and release the PTT button. You hear a ringing tone.
Otherwise, press and hold the PTT button. Wait for the talk permit tone before talking, and
release the PTT button to listen. For duplex calls, press and release the Send key. You hear
a ringing tone.
• DMO — Only simplex calls are available. Press and hold the PTT button. Wait for the talk
permit tone before talking, and release the PTT button to listen.
4 To end the call, press the End key.
5.7
Dialing through Soft Numeric Keypad
Prerequisites: Direct Private Number Dialing is assigned to a Right Navigation key.
Procedure:
1 From the home screen, press and hold Right Navigation.
Your radio displays dialing number prompt.
2 Rotate the Rotary Knob or press Up or Down Navigation key to choose the number, then press
the Rotary Knob or Right Navigation key to go to the next digit.
NOTICE:
• You can enter # at the end when the Speed Dialing feature is enabled.
• The + sign you can enter only when you are editing the first position. Both signs are
available after digit 9.
6866588D06–RB
Chapter 5: Features
Send Feedback 101