Motorola MTP8000Ex Series Скачать руководство пользователя страница 85

Страница: 85 / 176

5.3.1.6

Configuring Delivery Reports

Prerequisites:

Your service provider enabled the delivery report configuration.

Procedure:

From the home screen, press the

key.

Select

Messages

→

New Message

Press MENU key and select

Delivery Report

Select one of the following:

•

None

— the radio does not request any delivery report.

•

Received

— the radio requests reports on your messages that were received.

•

Consumed

— the radio requests reports on your messages that were read.

•

Both

— the radio requests reports on your messages that were received and read.

5.3.2

Inbox

It contains up to 100 new or old incoming messages, depending on the length of the messages.

Table 19: Inbox Icons

Icon

Description

Unread (New) Message

Read (Old) Message

Sender Information in Message View — name or number

Time and Date Stamp in Message View — arrival time and date

Delivery Status Received — delivery status for Store & Forward messages

Messages

sub-menu indicates the number of the messages. If the indication is for example 2/4, it

means that two unread and four read messages are in the

Inbox

5.3.2.1

Entering the Inbox

Procedure:

From the home screen, press the

key.

Select

Messages

→

Inbox

NOTICE:

The status (if any) of the list is displayed for a few seconds:

•

No New or Old Messages

— The screen returns to the previous display within a few

seconds.

•

Inbox Full

— Select

MN002041A01–AA

Chapter 5: Main Menu

Send Feedback

Содержание MTP8000Ex Series
















































































































































































Результаты поиска

Содержание MTP8000Ex Series

Отзывы:

Motorola MTP8000Ex Series, Руководство пользователя по функциям, Страница: 85 / 176

Результаты поиска

Содержание MTP8000Ex Series

Отзывы: