4.7.2
Set Volume
This menu item allows you to adjust the Speaker and Earpiece tone volumes.
4.7.2.1
Setting Volume
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Setup
→
Set Volume
.
3
Select
Speaker
or
Earpiece
.
4
Select one of the following options:
•
Voice Vol
– Sets the volume level for voice.
•
Duplex Vol
– Sets the volume level for duplex ringtones.
•
Simplex Vol
– Sets the volume level for simplex ringtones.
•
Keypad Vol
– Sets the volume level for keypad tones.
•
Tones Vol
– Sets the volume level for alert tones.
•
Call-Out Vol
– Sets the volume level for Call-Out tones (if enabled).
NOTICE:
If the display shows only one option
Volume
, you can adjust all of the above
settings at once. You have the option to change the settings individually when the
Volume Adj. Mode
is set to
Individual
.
5
Press
Right
or
Left
Navigation key to change the value.
NOTICE:
When the battery level is low it is not recommended to attach the 4 Ω speaker
to the radio as it can cause reset or shutdown of the radio.
4.7.3
Language
This sub-menu allows you to change the language of the radio.
4.7.3.1
Setting Language
Prerequisites:
The list of available languages is set by service provider.
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Setup
→
Language
.
3
Select desired language.
4.7.4
Data Setup
This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use the PMKN4124 (for E2E KVL)
or PMKN4127 (for AIE and Authentication KVL) cable.
68015000797-EH
Chapter 4: Main Menu
88