Motorola MTP3100, Руководство пользователя, Страница: 108 / 132

Procedure:
1 From the home screen, press and hold Right Navigation.
Your radio displays dialing number prompt.
2 Press Up or Down Navigation key to choose the number, then press Right Navigation key to go
to the next digit.
NOTICE:
• You can enter # at the end when the Speed Dialing feature is enabled.
• The + sign you can enter only when you are editing the first position. Both signs are
available after digit 9.
3 Press the PTT or the Send key (only in TMO).
5.6
Home Display Text Message
Your radio is provided with a feature that allows your service provider to send special text messages to
the display. The message stays on the home screen until a new message is received. Power cycle
your radio to replace the Home Display message to the predefined one.
5.7
MS-ISDN
This feature adds to the radio ISDN number. You can choose between MS-ISDN and ISSI to address
the call, send the message or pre-defined templates. It works for both simplex and duplex calls, based
on the assigned ISDN number.
5.8
Private Call
Private Call, also called Point-to-Point, or individual call, enables calling between two individuals. No
other radio can hear the conversation. This call type can be carried out in two ways:
• Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time. Start the
conversation using the Send key.
• Simplex call, in TMO or DMO Mode. Only one party can speak at a time. Start the conversation
using the PTT button.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy
indication. The radios are identified using its radio numbers.
5.8.1
Making Private Calls
Prerequisites:
Direct Private Number Dialing is assigned to the Right Navigation key.
Procedure:
1 From the home screen, press and hold the Right Navigation key and enter a number.
2 If Private is not the first type of call presented, press Ctype repeatedly to select it.
3 When you are in the following mode:
• TMO – For simplex calls, press and release the PTT button. You hear a ringing tone.
Otherwise, press and hold the PTT button. Wait for the talk permit tone before talking, and
68015000897–FC
Chapter 5: Features
108 Send Feedback