Motorola MT2070, Руководство пользователя

Страница: 140 / 606

2 - 92 MT2070/MT2090 User Guide
Selecting OK sends the credentials to the WCS. If there are no credentials entered, a dialog displays asking the
user to fill in all required fields.
Log Off only displays when a user is already logged on. When Log Off is selected, the user is prompted with three
options: Log Off , Switch Users and Cancel . Switching users logs off the current user and re-initialize the login
dialog to be displayed for when there is no user logged on.
Logging off logs off the current user and close the login dialog. Selecting Cancel closes the Log Off dialog and
returns to the
Login dialog.
When the user is logged off, the device only roams to profiles that do not require credentials or to profiles that were
created with the credentials entered into the profile. Selecting
Cancel closes the dialog without logging into the
network. If the login dialog was launched by the WCS and not by the user, selecting Cancel first causes a message
box to display a warning that the cancel disables the current profile. If the user still chooses to cancel the login at
this point, the profile is cancelled.
Once a profile is cancelled, the profile is suppressed until a user actively re-enables it or a new user logs onto the
device.
Enable/Disable Radio
On the Wireless Companion menu, press the up or down Scroll key to highlight Enable or Disable Radio and press
ENT . The radio is enabled or disabled, depending on its current state.
Table 2-28
Log On/Off Options
Field Description
Wireless Profile Field When launching the login application, the Wireless Profile field has available all the wireless
profiles that require credentials. This includes profiles that use EAP TLS, PEAP, LEAP,
EAP-TTLS or EAP-FAST.
Profile Status Icon The profile status icon (next to the profile name) shows one of the following states:
•
The selected profile is cancelled.
•
The selected profile is enabled but is not the current profile.
•
The profile is the current profile (always the case for WCS Launched).
Username, Password and
Domain Name Fields The Username , Password and Domain Name fields are used as credentials for the profile
selected in the Wireless Profile field. The Password field is limited to 63 characters. The
Username and Domain Name fields combined are limited to 63 characters. Note if any of
the above field labels are red, then entry is mandatory; if the field labels are black, then
entry is optional.
Mask Password
Check box The Mask Password check box determines whether the password field is masked (i.e.,
displays only the 1*1 character) or unmasked (i.e., displays the entered text). Check the
box to unmask the password. Uncheck the box to mask the password (the default).
Status Field The status field indicates the reason the dialog is open.