manualshive.com logo in svg

Motorola MPC8240, Руководство пользователя

Motorola MPC8240 - процессор, предназначенный для встраиваемых систем. Пользователям доступен бесплатный пользовательский мануал для этого продукта. Скачайте его с {вебсайт}, чтобы ознакомиться с подробной информацией и настройками устройства.

Поделиться
Скачать
background image

5-14

MPC8240 Integrated Processor User’s Manual

 

Programming Model  

3

EBD

Enable internal peripheral bus (60x bus) data parity checking
0 Parity checking is disabled.
1 Allows a data parity error to cause a checkstop if MSR[ME] = 0 or a machine check exception 

if MSR[ME] = 1

EBA and EBD let the processor operate with memory subsystems that do not generate parity. 

4

SBCLK

CKO output enable and clock type selection. When PMCR1[CKO_SEL] = 0, this bit is used in 
conjunction with HID0[ECLK] and the hard reset signals to configure CKO. See Table 5-2. 

5

—

EICE bit on some other PowerPC devices
This bit is not used in the MPC8240 (and so it is reserved).

6

 ECLK

CKO output enable and clock type selection.When PMCR1[CKO_SEL] = 0, this bit is used in 
conjunction with HID0[SBCLK] and the hard reset signals to configure CKO. See Table 5-2.

7

—

PAR bit on some other PowerPC devices to disable precharge of ARTRY signal.
This bit is not used in the MPC8240 (and so it is reserved).

8

DOZE

Doze mode enable. Operates in conjunction with MSR[POW]. 

1

0 Processor doze mode disabled.
1 Processor doze mode enabled. Doze mode is invoked by setting MSR[POW] while this bit is 

set. In doze mode, the PLL, time base, and snooping remain active.

9

NAP

Nap mode enable—Operates in conjunction with MSR[POW] 

1

0 Processor nap mode disabled
1 Processor nap mode enabled. Nap mode is invoked by setting MSR[POW] while this bit is set. 

When this occurs, the processor indicates that it is ready to enter nap mode. If the peripheral 
logic determines that the processor may enter nap mode (no more snooping of the internal 
buffers is required), the processor enters nap mode after several processor clocks. In nap 
mode, the PLL and the time base remain active. 

Note that the MPC8240 asserts the QACK output signal depending on the power-saving state 
of the peripheral logic, and not on the power-saving state of the processor core.

10

SLEEP

Sleep mode enable—Operates in conjunction with MSR[POW] 

1

0 Processor sleep mode disabled
1 Processor sleep mode enabled—Sleep mode is invoked by setting MSR[POW] while this bit 

is set. When this occurs, the processor indicates that it is ready to enter sleep mode. If the 
peripheral logic determines that the processor may enter sleep mode (no more snooping of 
the internal buffers is required), the processor enters sleep mode after several processor 
clocks. At this point, the system logic may turn off the PLL by first configuring PLL_CFG[0–4] 
to PLL bypass mode, and then disabling the internal sys_logic-clk signal.

Note that the MPC8240 asserts the QACK output signal depending on the power-saving state 
of the peripheral logic, and not on the power-saving state of the processor core.

11

DPM

Dynamic power management enable 

1

0 Processor dynamic power management is disabled.
1 Functional units enter a low-power mode automatically if the unit is idle. This does not affect 

operational performance and is transparent to software or any external hardware. 

12–14

—

Reserved

15

NHR

Not hard reset (software-use only)—Helps software distinguish a hard reset from a soft reset. 
0 A hard reset occurred if software had previously set this bit.
1 A hard reset has not occurred. If software sets this bit after a hard reset, when a reset occurs 

and this bit remains set, software can detect that it was a soft reset. 

Table 5-1. HID0 Field Descriptions  (Continued)

Bits

Name

Description

Содержание MPC8240



































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MPC8240

Paradyne 4300 Installation Instructions Manual preview
4300
Бренд: Paradyne Страницы: 22
XMG OASIS Disassembly Procedure preview
OASIS
Бренд: XMG Страницы: 5
NAD M10 Quick Setup Manual preview
M10
Бренд: NAD Страницы: 2
Panasonic MICROCOMPUTER MN103S Connection Diagrams preview
MICROCOMPUTER MN103S
Бренд: Panasonic Страницы: 5
Panasonic MICROCOMPUTER MN103S Application Note preview
MICROCOMPUTER MN103S
Бренд: Panasonic Страницы: 21
Panasonic FP2 Series Manual preview
FP2 Series
Бренд: Panasonic Страницы: 56
Panasonic FP2 Series Product Manual preview
FP2 Series
Бренд: Panasonic Страницы: 28
Panasonic KX-HTS Series Quick Start Manual preview
KX-HTS Series
Бренд: Panasonic Страницы: 2
Panasonic WJMPU955 - PROCESSING UNIT - TMU Operating Instructions Manual preview
WJMPU955 - PROCESSING UNIT - TMU
Бренд: Panasonic Страницы: 62
Palm M505 Setting Up preview
M505
Бренд: Palm Страницы: 4
Lancom 7100 VPN Manual preview
7100 VPN
Бренд: Lancom Страницы: 70
Accom WSD/HDe Installation Procedure preview
WSD/HDe
Бренд: Accom Страницы: 15
Avaya PARTNER PC CARD Installation Instructions preview
PARTNER PC CARD
Бренд: Avaya Страницы: 4
Advantech MIC-730AI User Manual preview
MIC-730AI
Бренд: Advantech Страницы: 36
Cypress Semiconductor CY7C68033 Specification Sheet preview
CY7C68033
Бренд: Cypress Semiconductor Страницы: 33
Renesas E200F User Manual preview
E200F
Бренд: Renesas Страницы: 76
Logicube ZCLONE User Manual preview
ZCLONE
Бренд: Logicube Страницы: 56
iesy Open Standard Module RPX30 EVA-MI V1 Quick Start Manual preview
Open Standard Module RPX30 EVA-MI V1
Бренд: iesy Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды