Motorola MOTOTRBO 6300 Скачать руководство пользователя страница 24

Страница: 24 / 62

Tests and Subtests

Accesses processor register address space.

Accesses input/output address space.

Subtest 1 tries to access the GSR and should cause an exception?

subtest 2 tries to access an I/O address register and also should

generate an exception.

Errors

Test 5 can return the following error:

No interrupt on User I/O test.

Test Output

Output for a run of the user I/O error test is as follows:

USER I/O ERROR TEST

USER I/O ERROR SUBTEST 1

USER I/O ERROR SUBTEST 2

TESTS 6 AND 8s

DISK TESTS — WINCHESTER AND FLOPPY (w AND o)

Systems contain a Winchester hard disk drive and a floppy disk

drive.

(For more information about disk drives, see the Technical

M a nual♦)

The System 6300 disk tests are

Test 6.

Winchester Disk Test (w)

Test 8.

Floppy Disk Test (o)

The same subtests are provided for both disks except that an

additional subtest, read track N, is provided for the floppy

disk.

The subtests are

Recal.

Format (interactive).

Write over all the disk with sector address data.

Read all the disk.

Random seeks with read sector.

Write multiple sectors (interactive).

Read multiple sectors (interactive).

Spare a sector (interactive).

Force DMA faults.

10.

Initialize VHB and BBT.

11.

Write VHB and BBT after aborted test 3.

12.

Print VHB and BBT.

13.

Download to disk.

14.

Toggle alien disk mode.

2-8

Содержание MOTOTRBO 6300































































Результаты поиска

Содержание MOTOTRBO 6300

Отзывы:

Похожие инструкции для MOTOTRBO 6300

Бренды по названию

Популярные бренды

Motorola MOTOTRBO 6300, Руководство по обслуживанию

Результаты поиска

Содержание MOTOTRBO 6300

Отзывы:

Похожие инструкции для MOTOTRBO 6300

Бренды по названию

Популярные бренды