Motorola moto g4 PLAY, Руководство пользователя

Страница: 49 / 62

Connect & transfer 49
Wi-Fi Networks
Turn Wi-Fi power on/off
Find it: Apps > Settings > Wi-Fi , then tap the switch
to turn it on
Note:
Swipe down the status bar with two fingers to
quickly turn Wi-Fi on or off.
Connect to networks
To find networks in your range:
1
Tap Apps >
Settings
>
Wi-Fi
.
Tip:
To show your phone’s MAC address and Wi-Fi
settings, tap Menu > Advanced .
2 Make sure the Wi-Fi power switch is on.
3 Tap a found network to connect to it (if necessary, enter
Network SSID
,
Security
, and
Wireless password
, and tap
Connect ).
When your phone connects, the Wi-Fi status indicator
appears in the status bar.
Note:
If you see a question mark in the Wi-Fi status
indicator , swipe the status bar down, tap the network,
and enter the network’s password.
Tip:
When Wi-Fi power is on, your phone automatically
reconnects to available networks it has used before. If a
router previously had no internet connection, your phone
will not automatically connect to it.
Wi-Fi hotspot
Note:
This phone supports apps and services that may use
a lot of data, so make sure your data plan meets your needs.
Contact your service provider for details.
Your can make your phone a Wi-Fi hotspot to provide
portable, convenient internet access to other Wi-Fi enabled
devices.
Note:
Keep it secure. To protect your phone and hotspot
from unauthorized access, it is strongly recommended that
you set up hotspot security (WPA2 is the most secure),
including password.
Find it: Apps > Settings > More > Tethering &
portable hotspot
, then tap the
Portable Wi-Fi Hotspot
Note:
These steps may vary depending on your network.
1
Your phone turns off Wi-Fi power and uses the mobile
network for internet access. Tap
Set up Wi-Fi hotspot to
set up security:
• Network SSID:
Enter a unique name for your hotspot.
• Security:
Select the type of security you want:
Open
or WPA2 . For WPA2 , enter a unique password that
others will need to access your Wi-Fi hotspot.
Note:
WPA2 is recommended by IEEE.
• Password:
Create a password with at least eight
characters.
2 Tap SAVE when the settings are complete.