19
2. Using the navigation button, move the indicator to
Factory Reset
. Press
Select
softkey.
3. Move the indicator to
Yes
and press
Select
softkey. Confirm the action once more and the
phone will reboot with the default settings.
NOTE
This will erase records in call history, phonebook, all greetings and all messages in the memories.
10
Basic Operation
Your phone provides the convenience of accessing four separate telephone lines, each having
its own phone number. It can have up to ten telephones or cordless handsets sharing multiple
lines. Each station is interconnected to all others via intercom.
10.1 Making Calls with the Handset
1. Pick up the handset and the phone automatically selects the priority line. If the priority
line is in use, it will select the next open line or you may select a line by pressing the
corresponding
LINE
button.
2. Wait for the dial tone, then dial a phone number.
3. Hang up the handset when finished.
10.2 Making Calls with the Speakerphone
1. Press
s
and the phone automatically selects the priority line. If the priority line is in use, it
will select the next open line or you may select a line by pressing the corresponding
LINE
button.
2. Wait for the dial tone, then dial a phone number.
3. Press
s
when finished.
10.3 Making Calls with the Optional Headset
1. Connect the headset plug into the headset jack on the right side of the base.
2. Adjust the headset so the microphone is approximately 2 to 3 inches away from
your mouth.
3. Press
h
and the phone automatically selects the priority line. If the priority line is in use, it
will select the next open line or you may select a line by pressing the corresponding
LINE
button.
4. Wait for the dial tone, then dial a phone number.
5. Press
h
when finished.
NOTE
The Motorola multi-line phone system will work with most telecom headsets that have a 2.5mm
headset jack.
10.4 Pre-Dialing
1. With the phone idle and the handset in the cradle, manually enter the telephone number.
The number will show in the display.
2. Press
Dial
softkey,
s
or lift the handset to take a line and the number will automatically be
dialed. Press
Clear
softkey to delete the previous digit or
Home
softkey to cancel the call
before dialing.
10.5 Answering Calls
When receiving an incoming call, you may:
1. Pick up the handset.
2. Press
s
.
3. Press
h
.
