Motorola MG8702 Скачать руководство пользователя страница 58

Страница: 58 / 78

Setting up times when Internet access is allowed and

not allowed

You can allow Internet access for a particular device only during hours

that you specify. Access will be allowed to all Internet sites. Internet

access will not be allowed to any site outside of the hours that you

specify.

To do this, enter a Policy Name (e.g. Ann’s Laptop). Make sure the

device you want to control is powered on and connected to the

MG8702. Use the Select Device pulldown to select this device. The

pulldown will show the MAC Addresses of devices connected to your

MG8702. You may find the MAC Address of the device you want to

control from the device itself. Follow instructions for the device and

operating system to do this.

You may also find the device’s MAC Address by looking at the client list

on your MG8702. Click Basic Router



DHCP and look at the MAC

Addresses in the DHCP Client List:

You may have to do a little sleuthing to find your device’s MAC Address,

for example by turning the device off and on again to see which MAC

Address is removed and then restored to the list.

Содержание MG8702















































































Результаты поиска

Содержание MG8702

Отзывы:

Бренды по названию

Популярные бренды

Motorola MG8702, Руководство пользователя

Результаты поиска

Содержание MG8702

Отзывы:

Бренды по названию

Популярные бренды