Motorola MC9500-K - Win Mobile 6.1 806 MHz Скачать руководство пользователя

Страница: 190 / 284

8 - 16 MC9500-K Mobile Computer User Guide

Cables

This section describes how to set up and use the cables. The cables are available with a variety of connection

capabilities.

The following communication/charge cables are available:

•

USB/Charge cable

•

Provide the MC9500-K with operating and charging power when used with the Motorola approved power

supply.

•

Synchronize information between the MC9500-K and a host computer. With customized or third party

software, it can also synchronize the MC9500-K with corporate databases.

Figure 8-13

USB/Charge Cable

•

Charge Only cable

•

Provide the MC9500-K with operating and charging power when used with the Motorola approved power

supply.

•

Single Bay Cradle/Charger Y Cable

•

Provide the power to a Single Bay USB Cradle and Single Slot Battery Charger or two Single Slot Battery

Chargers off one power supply when used with the Motorola approved power supply.

Figure 8-14

Single Slot Cradle/Charger Y-Cable

•

Auto Charge cable.

•

Provides the MC9500-K or Vehicle Battery Charger with operating and charging power tough a cigarette

lighter.

Содержание MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Результаты поиска

Содержание MC9500-K - Win Mobile 6.1 806 MHz

Отзывы:

Похожие инструкции для MC9500-K - Win Mobile 6.1 806 MHz

Бренды по названию

Популярные бренды

Motorola MC9500-K - Win Mobile 6.1 806 MHz, Руководство пользователя

Результаты поиска

Содержание MC9500-K - Win Mobile 6.1 806 MHz

Отзывы:

Похожие инструкции для MC9500-K - Win Mobile 6.1 806 MHz

Бренды по названию

Популярные бренды