Motorola MC9500-K - Win Mobile 6.1 806 MHz, Руководство пользователя

Страница: 186 / 284

8 - 12 MC9500-K Mobile Computer User Guide
Vehicle Cradle
This section describes how to use a vehicle cradle with the MC9500-K. For cradle installation and communication
setup procedures refer to the
VCD9500 Vehicle Cradle Quick Reference Guide
.
Once installed in a vehicle, the cradle:
•
holds the MC9500-K securely in place
•
provides power for operating the MC9500-K
•
re-charges the battery in the MC9500-K.
Charging the MC9500-K Battery
Insert the MC9500-K into the vehicle cradle with the display facing out.
Push back the level forward to lock the MC9500-K into place. The MC9500-K automatically begins charging.
Figure 8-9
Vehicle Cradle
To remove the MC9500-K, push the side levers toward the back of the Vehicle cradle. Lift the MC9500-K out of the
cradle.
The MC9500-K’s Battery Status LED indicates the status of the battery charging in the MC9500-K. See
Table 1-1
on page 1-8
for charging status indications. The 4800 mAh battery fully charges in less than six hours.
NOTE
The MC9500-K will not begin charging unless the side level is locked into place.
Side Lever
CAUTION
Ensure the MC9500-K is fully inserted in the cradle. Lack of proper insertion may result in property damage
or personal injury. Motorola is not responsible for any loss resulting from the use of the products while
driving.