Motorola MC9500-K - Win Mobile 6.1 806 MHz, Руководство пользователя

Страница: 121 / 284

Chapter 6 Using GPS Navigation
Introduction
The MC9500-K includes Global Positioning System (GPS) technology using the SiRFstar III chipset. GPS
technology is based on a worldwide system of GPS satellites orbiting the earth that continuously transmit digital
radio signals. These radio signals contain data on the satellites’ locations and their exact clock time and are used
to determine your location on the earth.
Software Installation
Third-party GPS navigation software is required. Evaluation software is available from various suppliers. For
example; VisualGPS, visit: http://www.visualgps.net/VisualGPSce/
If interested in purchasing GPS navigation software check with the GPS software vendor (before purchasing,
downloading, or installing any software) to determine that the application is compatible with the MC9500-K. Refer
to the application’s user guide for application installation and setup information.
MC9500-K GPS Setup
The GPS-enabled MC9500-K uses Microsoft Windows Mobile 6, so the operating system automatically manages
access to the GPS receiver to allow multiple programs to simultaneously access GPS data.
By default, the MC9500-K has the following settings:
1.
Tap
Start
>
Settings
>
System
>
External GPS
icon.
2.
In the
Programs
tab, the
GPS program port
is set to
None
.
3.
In the
Hardware
tab, the
GPS hardware port
is set to
COM8
.
WARNING
!
When using the MC9500-K in a vehicle, it is the user’s responsibility to place, secure and use in a
manner that will not cause accidents, personal injury or property damage or obstruct their view. It
is the responsibility of the driver to operate the vehicle in a safe manner, maintain observation of
all driving conditions at all times, and not become distracted by the device to the exclusion of safe
driving practices. It is unsafe to operate the controls of the device while driving.