manualshive.com logo in svg

Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz, Руководство пользователя

Поделиться
Скачать
Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz Скачать руководство пользователя страница 210

7 - 10 MC909X User Guide

Single Slot Serial/USB Cradle

Table 7-6    

Troubleshooting the Single Slot Serial/USB Cradle

Symptom

Possible Cause

Solution

LEDs do not light 
when mobile 
computer or 
spare battery is 
inserted.

Cradle is not receiving 
power.

Ensure the power cable is connected securely to both the cradle 
and to AC power.

Mobile computer is not 
seated firmly in the 
cradle.

Remove and re-insert the mobile computer into the cradle, 
ensuring it is firmly seated. 

Spare battery is not 
seated firmly in the 
cradle.

Remove and re-insert the spare battery into the charging slot, 
ensuring it is firmly seated. 

Mobile computer 
battery is not 
charging.

Mobile computer was 
removed from cradle or 
cradle was unplugged 
from AC power too 
soon.

Ensure cradle is receiving power. Ensure mobile computer is 
seated correctly. Confirm main battery is charging. If a mobile 
computer battery is fully depleted, it can take up to four hours to 
fully recharge a battery (if the mobile computer is off and longer if 
the mobile computer is operating).

For Windows Mobile 5.0 devices, view battery status by tapping 

Start

 > 

Settings

 > 

System

 tab > 

Power

 icon.

For Windows CE 5.0 devices, view battery status by tapping 

Start

 

> 

Settings

 > 

Control Panel

 

> 

Power

 icon.

Battery is faulty.

Verify that other batteries charge properly. If so, replace the faulty 
battery.

The mobile computer 
is not fully seated in 
the cradle.

Remove and re-insert the mobile computer into the cradle, 
ensuring it is firmly seated. 

Spare battery is 
not charging.

Battery not fully seated 
in charging slot. 

Remove and re-insert the spare battery into the cradle, ensuring it 
is firmly seated. 

Battery inserted 
incorrectly. 

Ensure the contacts are facing down and toward the back of the 
cradle. 

Battery is faulty.

Verify that other batteries charge properly. If so, replace the faulty 
battery.

During data 
communications, 
no data was 
transmitted, or 
transmitted data 
was incomplete.

Mobile computer 
removed from cradle 
during 
communications.

Replace mobile computer in cradle and retransmit.

Incorrect cable 
configuration.

See the System Administrator.

Communications 
software is not 
installed or configured 
properly.

Perform setup as described in the 

MC909X Integrator Guide.

Ensure that Microsoft ActiveSync 4.1 or greater is installed on the 
host computer.

Содержание MC9090G - RFID - Win Mobile 5.0 624 MHz





























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды