Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz Скачать руководство пользователя страница 187

Страница: 187 / 252

Accessories

6 - 9

Four Slot Charge Only Cradle

This section describes how to use a Four Slot Charge Only cradle with the mobile computer.

Figure 6-7

Four Slot Charge Only Cradle (MC909X-G Shown)

The Four Slot Charge Only cradle has the following attributes:

•

Provides 12VDC power for operating the mobile computer.

•

Simultaneously charges up to four batteries in the mobile computer.

Battery Charging Indicators

The mobile computer’s amber charge LED, located in the Indicator LED Bar, shows the status of the battery
charging in the mobile computer. See

Table 1-2 on page 1-7

for charging status indications.

The battery usually charges in less than four hours.

CAUTION

Do not place coins, keys or paper clips in cradle well.

CAUTION

Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of an
alternative power supply will void the product warranty and may cause product damage. See

Appendix C, Regulatory

for the power supply regulatory compliance statement.

Содержание MC9090G - RFID - Win Mobile 5.0 624 MHz





























































































































































































































































Результаты поиска

Содержание MC9090G - RFID - Win Mobile 5.0 624 MHz

Отзывы:

Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz, Руководство пользователя, Страница: 187 / 252

Результаты поиска

Содержание MC9090G - RFID - Win Mobile 5.0 624 MHz

Отзывы: