manualshive.com logo in svg

Motorola MC50, Руководство пользователя

Поделиться
Скачать
Motorola MC50 Скачать руководство пользователя страница 56

3 - 6

MC50 with Windows Mobile 5.0 User Guide

Charging 

Insert the mobile computer into a slot to begin charging.

 Figure 3-5    

Mobile Computer Battery Charging 

Battery Charging Indicators

The mobile computer’s charge LED shows the status of the battery charging in the mobile computer. See 

Table 

1-2 on page 1-5

 for charging status indications.

The standard battery fully charges in approximately 3.5 hours and the extended capacity battery fully charges 
in approximately seven hours.

Four Slot Ethernet Cradle

This section describes how to set up and use a Four Slot Ethernet cradle with the mobile computer. For cradle 
communication setup procedures refer to the 

MC50 Integrator Guide

.

The Four Slot Ethernet cradle:

•

Provides 12 VDC power for operating the mobile computer.

•

Enables data communication between the mobile computer (up to four) and a host computer, using an 
Ethernet connection.

•

Synchronizes information between the mobile computer and a host computer. (With customized or third 
party software, it can also synchronize the mobile computer with corporate databases.)

•

Connects the mobile computer (up to four) to an Ethernet network.

•

Simultaneously charges up to four batteries in the mobile computer.

Содержание MC50



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды