manualshive.com logo in svg

Motorola MC3000, Руководство пользователя

Поделиться
Скачать
Motorola MC3000 Скачать руководство пользователя страница 121

Maintenance and Troubleshooting

5 - 5

Four Slot Charge Only Cradle

Spare battery is not 

charging.

Battery not fully seated in 

charging slot. 

Remove and re-insert the spare battery into the cradle, 

ensuring it is correctly seated.

Battery inserted incorrectly. 

Ensure the contacts are facing down and toward the 

back of the cradle.

Battery is faulty.

Verify that other batteries charge properly. If so, replace 

the faulty battery.

During data 

communication, no 

data was transmitted, 

or transmitted data was 

incomplete.

Mobile computer removed 

from cradle during 

communication.

Replace mobile computer in cradle and retransmit.

Incorrect cable configuration.

See the system administrator or refer to the 

MC3000 

Integrator Guide.

Communication software is 

not installed or configured 

properly.

See the system administrator or refer to the 

MC3000 

Integrator Guide.

Table 5-2    Troubleshooting the Single Slot Serial/USB Cradle (Continued)

Symptom

Possible Cause

Solution

Table 5-3    Troubleshooting the Four Slot Charge Only Cradle

Problem

Cause

Solution

Mobile computer amber 

Charge LED Indicator does 

not light when mobile 

computer inserted.

Cradle is not receiving power.  Ensure the power cable is connected securely to 

both the cradle and to AC power.

Mobile computer is not 

correctly seated.

Remove and re-insert the mobile computer into the 

cradle, ensuring it is correctly seated. 

Mobile computer battery is 

not charging.

Mobile computer was 

removed from cradle or cradle 

was unplugged from AC 

power too soon.

Ensure cradle is receiving power. Ensure the 

mobile computer is seated correctly. If the mobile 

computer battery is fully depleted, it can take up to 

four hours to fully recharge a Standard Battery and 

it can take up to six hours to fully recharge an 

Extended Life Battery.

Battery is faulty.

Verify that other batteries charge properly. If so, 

replace the faulty battery.

The mobile computer is not 

fully seated in the cradle.

Remove and re-insert the mobile computer into the 

cradle, ensuring it is correctly seated. 

Содержание MC3000

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды