Motorola MC3000 Скачать руководство пользователя страница 117

Страница: 117 / 152

Chapter 5 Maintenance and Troubleshooting

Introduction

This chapter includes instructions on cleaning and storing the mobile computer, and provides troubleshooting

solutions for potential problems during mobile computer operation.

Maintaining the Mobile Computer

For trouble-free service, observe the following tips when using the mobile computer:

•

Do not scratch the screen of the mobile computer. When working with the mobile computer, use the supplied

stylus or plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen or

pencil or other sharp object on the surface of the mobile computer screen.

•

Although the mobile computer is water and dust resistant, do not expose it to rain or moisture for an extended

period of time. In general, treat the mobile computer as a pocket calculator or other small electronic

instrument.

•

The touch-sensitive screen of the mobile computer is glass. Do not to drop the mobile computer or subject it

to strong impact.

•

Protect the mobile computer from temperature extremes. Do not leave it on the dashboard of a car on a hot

day, and keep it away from heat sources.

•

Do not store or use the mobile computer in any location that is extremely dusty, damp, or wet.

•

Use a soft lens cloth to clean the mobile computer. If the surface of the mobile computer screen becomes

soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution.

Battery Safety Guidelines

•

The area in which the units are charged should be clear of debris and combustible materials or chemicals.

Particular care should be taken where the device is charged in a non-commercial environment.

•

Do not use incompatible batteries and chargers. If you have any questions about the compatibility of a

battery or a charger, contact Motorola Enterprise Mobility support. See

Service Information on page xvi

for

contact information.

Содержание MC3000

























































































































































Результаты поиска

Содержание MC3000

Отзывы:

Бренды по названию

Популярные бренды

Motorola MC3000, Руководство пользователя

Результаты поиска

Содержание MC3000

Отзывы:

Бренды по названию

Популярные бренды