Motorola MBP844CONNECT, Руководство пользователя

Страница: 13 / 56

Getting Started 13
ENGLISH
When charging
1. Whilst the power is OFF, and the adapter is plugged in, an adapter logo will
appear on-screen and a flashing battery logo will display for 15 seconds.
The Blue LED at the top left corner will light up, indicating that the adapter
is plugged in.
2. Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging. The
Blue LED at the top left corner will light up to indicate that the adapter is
plugged in.
2.4 Registration (Pairing)
The Baby monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
1. Press the
M
button of the Parent Unit and the menu bar will pop up.
2. Press the LEFT button or RIGHT button until is highlighted, and
the
/ / /
menu will pop up.
3. Press the UP button or DOWN button to select , and press the
O
button to confirm.
4. / / / will pop up, press the UP button or DOWN button
to select the desired CAM and press the
O
button to start searching for
a camera unit. The green audio level LED will flash rapidly while searching.
5. Press the
O
button to confirm.
6. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
2.5 View Video Through TV
Connect a suitable AV cable into the AV OUT socket on the side of the Parent
Unit and into the AV input of the TV. Scroll to select
on the Parent Unit. Scroll
through the AV inputs on the TV menu until the Baby monitor picture is visible.
AV cable is an optional accessory, which is to be purchased separately.
del
add view scan
add
cam
*1
cam
2
cam
3
cam
4
V
:<