manualshive.com logo in svg

Motorola LEX L10ig, Руководство пользователя

Поделиться
Скачать
Motorola LEX L10ig Скачать руководство пользователя страница 167

Bluetooth Profile

Description

Find Me Profile (FMP Locator)

Allows the device to locate other Bluetooth-ena-
bled devices paired with your device.

Proximity profile (PXP Monitor)

Enables proximity monitoring between two devi-
ces.

Heart Rate Profile (HRP Collector)

Enables transmission and reception of medical
device data.

HID over GATT Profile (HOGP Host)

Defines how a device with Bluetooth low energy
(LE) wireless communications can support HID
services over the Bluetooth LE protocol stack
using the Generic Attribute Profile.

Return to Process

Bluetooth Device

 on page 164

11.3.4

Bluetooth Power States

The Bluetooth radio is off by default.

The following modes are available:

•

Suspend

 — When the device goes into suspend mode, the Bluetooth radio stays on.

•

Airplane Mode

 — When the device is placed in 

Airplane Mode

, the Bluetooth radio turns off.

When 

Airplane Mode

 is disabled, the Bluetooth radio returns to the prior state. When in 

Airplane

Mode

, the Bluetooth radio can be turned back on if desired.

Return to Process

Bluetooth Device

 on page 164

11.3.5

Bluetooth Radio Power for Android

Bluetooth allows your LEX device to wirelessly connect to other Bluetooth-enabled devices.

Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (for example, an
airplane). When the radio is off, other Bluetooth devices cannot see or connect to the device. Turn on
the Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate
only with Bluetooth radios in close proximity.

NOTICE: 

To achieve the best battery life, turn off radios when not in use.

Return to Process

Bluetooth Device

 on page 164

Related Links

Enabling Bluetooth

 on page 168

Disabling Bluetooth

 on page 168

MN003477A01-A

Chapter 11:  Wireless

Send Feedback

  167

Содержание LEX L10ig



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды